Mitox CS50 Betreibershandbuch PDF herunterladen (Seite 5)

CS45 / CS50 / CS56 Chainsaw

Original Instructions Version April 12

Before using your chain saw

• Before beginning work, carefully check around the area and remove any obstacles and clear a retreat path

from falling trees.

• The area within a perimeter of 15 metres of the person using the chain saw should be considered a

hazardous area into which no one should enter while the chain saw is being used, and when necessary mark

with a warning rope, warning signs, or other forms of warning. When work is to be performed simultaneously

by two or more operators, care should also be taken to constantly look around to check the presence and

locations of other operators within the work area so as to maintain a safe distance between each person.

• Before beginning work, each component of the chain saw should be checked to make sure that it is in

proper working order and to make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents, or

any other problems which might interfere with safe operation. Be especially careful to check that there is no

damage to the blades or chain brake.

• Never use the chain saw when the blades/chain are excessively worn or when any sort of damage has

occurred to the cutting mechanism.

Keep all parts of your body away from the saw chain when the engine is running.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Keine Kommentare

Mitox CS50 Betreibershandbuch Seite 5